Cabinet/010 Cabinet height.pdf
From Seasons 4 Wiki
Return to Procedures Main Menu
Index: Cabinet
Subject: (10) Unit Height
Date: 03/18/04
Revised May 13, 2013
All units shall be designed using one of the eight (8) standard heights given below:
| Number | Height | Model Designation |
| 1 | 60" | B |
| 2 | 66 | C |
| 3 | 77 | F |
| 4 | 90 | I |
| 5 | 101 | K |
| 6 | 120 | R |
| 7 | 132 | T |
| 8 | 138 | T |
Any exception must be pre-approved prior to putting it in a drawing. Exception should be brought to Engineering Manager’s attention. The Engineering Manager, with consultation with Operations Manager, will approve or disapprove exceptions. If an old job is being copied to design a new unit and the old unit height is different than one of the standard heights, the height shall be changed to match with one of the standard heights shown above.
