Cabinet/004 Cabinet Remote Terminal Access.pdf

Return to Procedures Main Menu

From: Jim Ziaukas

Sent:   Friday, January 22, 1999 10:33 AM

To:       Clay Brown; David Ament; Eulie Rushton; Glen Ragsdale; Greg Saxon; Hal Holloway; Jim Lang; Jim Ziaukas; Karl Vanky; Lewis Watford; M Warren; Matt Engelbert; Mohammad Naeemullah; Ray Hopkins; Ricky Teal; Robert Lawson; Ron Eberhart; Russ Fiveash; Shawn Nassiri; Tim Gray

Subject: (4) CABINET—REMOTE TERMINAL ACCESS

Terminal and power field connections are not always located in the control panel section (this occurs most frequently on replacement equipment). Often, the control panel is in an entirely different section of the unit so that we have sufficient space to mount components. When this occurs, the access to the field connections should be through a screw-on panel, usually approximately 24" square. This allows the required one-time access for field wiring of the unit. Thereafter, there is no need to access these connections. The screw-on panel should be labeled "Field wiring connection".