Ebtron Airflow Monitor Station

Ebtron airflow monitoring stations (AFMS) are typically mounted on the OA intake damper when specified.  The GTA116-PC model is the standard for S-4.  The monitoring stations uses a series of probes and sensors to measure the aiflow through the damper.  (ADD MORE TECHNICAL INFO HERE - TDM; 1/22/20).

When ordering an Ebtron aiflow measuring station, you must send the design info to Purchasing, so they can add details to the P.O. and relay the info to Ebtron.  When ordering an Ebtron airflow station, you must include:

• Damper Size (width x height).
• Mounting Type (e.g. Stand-off mounting).
• Wire Length (e.g. 25')
• Maximum Airflow (CFM) thru Damper.
• Face Velocity (FPM) thru Damper @ Max CFM.
• Drawing showing the location of the AFMS in the unit.
• Job Location (i.e city, state).

When ordering the AFMS, it is prefered that Ebtron determines the required number of probes ans snesors.  Our part number descriptions will not show this info for all future P/N setups.  Any existing P/N that has the correct damper size can be used, but it is recommended that and detail on the number or probes, sensors and wire length be removed from the exsting descriptions.  Ask Purchasing to make this chnsge before issuing the P.O.